


|
The AOR AR-Alpha is a new professional grade communications receiver which may be 19-inch rack mounted or used as a desk-top receiver. With continuous coverage from 10 kHz to 3.3 GHz (Cellular Blocked for US consumer version), using wide band receive, advanced DDS and DSP technology, the AR-Alpha delivers a powerful monitoring, searching and recording capability. Fast frequency processing is achieved by means of FFT and signals are visually displayed on the 6.4" TFT LED display both spectrally or as a waterfall function. TV signals can also be displayed (NTSC, PAL). Powerful DSP is employed at both IF and demodulation stages allowing many functions including Digital Filtering, Auto Notch filter, IF Shift, Noise Reduction, Analogue Voice De-scrambler, Tone Elimination, DCS, CTCSS, Level Squelch and Noise Squelch. Modes of reception include: WFM (in stereo selectable de-emphasis), NFM, AM (Synchronous AM, diversity synchronous AM), ISB, RZSSB, USB, LSB, CW, P25, Video (FM, AM NTSC/PAL). Dual communications ports are available on the back panel supporting both RS-232C and USB 2.0 connection. A 12kHz output is also provided for external DRM & SDR reception. I/Q outputs are provided with 1MHz Bandwidth. Input RF performance is provided by 17 high performance input Band Pass Filters and high linearity RF stages. A 10.7MHz 2nd IF stage is used and an innovative ZERO-IF 3rd IF is used for the DSP function. The receiver is referenced to an OCXO (Oven Controlled Crystal Oscillator) or external 10MHz reference. |
| Model: | AR-ALPHA |
| Receiver Configuration: | Triple conversion super heterodyne (Zero-IF) |
| Frequency coverage: | 10KHz ~ 3.5 GHz (Cellular Blocked for US consumer version) |
| Receive Modes: | WFM, FM-ST (FM Stereo), AM, SAM, USB, LSB, CW, ISB(Independent Sideband), SBD (Sideband Diversity), RZ-SSB(Real Zero SSB), AIQ (Analog I/Q) (---F.Y.I. Can be used as an analog output for DRM reception, 3rd party decoding software required), APCO-25 (P25, conventional mode), Video (NTSC, PAL, SECAM) |
| Sensitivity (w/ RF amp. ON): |
AM (BW=6KHz: 10dB S/N) 0.1 ~ 1.699MHz: 5 uV 1.699 ~ 24.99 MHz: 5uV 25 ~ 479.99 MHz: 2.3 uV 480 ~ 1029.99 MHz: 2.3 uV 1030 ~ 1695.99 MHz: 1.3uV 1696 ~ 3300 MHz: 1.5 uV FM (BW= 15 KHz: 12 dB SINAD) 25 ~ 479.99 MHz: 2.5 uV 480 ~ 1029.99 MHz: 0.8 uV 1030 ~ 1695.99 MHz: 0.8 uV 1696 ~ 3300 MHz: 1.5 uV WFM: (BW=200 KHz: 12 dB SINAD) 25 ~ 479.99 MHz: 1.3 uV 480 ~ 1029.99 MHz: 1.3 uV 1030 ~ 1695.99 MHz: 1.3 uV 1696 ~ 3300 MHz: 1.5 uV |
| IF frequencies: | 1st IF : 755 MHz /265 MHz 2nd IF : 10.7 MHz 3rd IF : Zero |
| Selectivity: |
SSB (BW = 3 KHz) more than 3 KHz at -3dB, less than 3.6 KHz at -90 dB CW (BW = 500 Hz) more than 500 Hz at -3dB, less than 700 Hz at -90dB AM (BW = 6 KHz) more than 6 KHz at -3dB, less than 15 KHz at -90dB FM (BW = 15 KHz) more than 15 KHz at -3 dB, less than 25 KHz at -90 dB |
| Spurious Sensitivity: | More than 60dB |
| Dynamic Range: | More than 90dB |
| IP3: | More than +2dBm (across the entire receive range) |
| Frequency stability: | Less than +/- 0.1ppm (after 5 minutes of power on time, at 0 ~ 50 degrees (C), 32 ~ 144 degrees (F) |
| Frequency resolution: | 1 Hz minimum |
| Memory channels: | 2000 |
| Search banks: | 40 |
| Scan speed: | 70 channels per second |
| Search speed: | 70 steps per second |
| Speaker impedance: | 8 ohms |
| Power requirement: | 11 ~ 16 V DC (13.8 V DC nominal) Negative ground |
| Antenna impedance: | 50 ohms nominal |
| Antenna inputs: | N, SO239 |
| Communication port: | RS-232C, USB |
| USB output: | 2.0 compatible |
| I/Q output: | 1MHz B/W maximum through USB port |
| Operating temperture: | 0 ~ 50 degrees (C), 32 ~ 144 degrees (F) |
| Dimensions: | 16-1/2 (w) x 5-1/8 (h) x 10-1/8 (d) (inch), projections not included. Suitable for rack mounting. |
| Weight: | 17lbs |
| Specification & price subject to change without notice due to continuous development of the receiver. E & OE. |
